PAPERS PRESENTED AT CONFERENCES

§ G. Mago, D.M. Kalyon, and F.T. Fisher "Effect of nanoparticles on microstructure and crystallization behavior of Polyvinylidene fluoride (PVDF) and PVDF nanocomposites membranes prepared using immersion precipitation technique", 236th National Meeting & Exposition of the American Chemical Society, August 17-21, Philadelphia, PA (paper number-182) (2008).

§ G. Mago, D.M. Kalyon, and F.T. Fisher. "Crystallization and morphology of carbon nanotube-Nylon-11 nanocomposites", 236th National Meeting & Exposition of the American Chemical Society, August 17-21, Philadelphia, PA (paper number-283) (2008).

§ G. Mago, J. A. Dutreuil, F.T. Fisher, and D.M. Kalyon “Structural formation in poly(butylene terephthalate) and PBT nanocomposites during uniaxial deformation”, ASME International Mechanical Engineering Conference and Exposition (IMECE), November 11-15, Seattle, WA (2007).

§ G. Mago, C. Velasco-Santos, A.L. Martinez-Hernandez, D.M. Kalyon, and F.T. Fisher, “Effect of Functionalization on the Crystallization Behavior of MWNT-PBT Nanocomposites”, Proceedings of the 2007 MRS Fall Meeting, November 26-30, Boston, MA (2007).

§ S. Ozkan, D. Kalyon and X. Yu, “Twin screw extrusion processing and shaping of biodegradable scaffolds with controlled morphologies for tissue engineering applications”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 7, 2007.

§ C. Erisken, D. Kalyon and H. Wang, “Nanocomposites for tissue engineering applications engineered using a novel twin screw extrusion and electrospinning process (SEEP-Screw Extrusion with Electrospinning”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 8, 2007.

§ G. Mago, F.T. Fisher, D. M. Kalyon, “Effect of shearing on crystallization behavior and morphology of PVDF nanocomposites”, Virtual Conference on Nanoscale Science and Technology (VC-NST), Fayetteville, Arkansas, October 21-25, 2007.

§ G. Mago, F.T. Fisher, and D.M. Kalyon “Nanoparticle-enhanced shear-induced crystallization of semicrystalline polymer nanocomposites”, 2007 Joint ASME/ASCE/SES Conference on Mechanics and Materials (McMAT2007), Austin, TX, June 3-7 (2007).

§ D. Kalyon, S. Ozkan, M. Malik, J. Kowalczyk and M. Mezger, “Twin screw extrusion of nanoenergetics with processing geometries that are tunable to the targeted thermo-mechanical history”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 8, 2007.

§ G. Mago, F. T. Fisher, D. M. Kalyon, “ Nanoparticle-enhanced processing-induced crystallization of PVDF and PVDF nanocomposites”, 44th Annual meeting of the Society of Engineering Science, Texas A&M University, College Station, TX, October 21-24, 2007.

§ J. Kowalczyk, D. Kalyon, H. Gevgilili, “Truly flexible manufacturing technologies for the processing of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

§ D. Kalyon, H. Gevgilili, “Shear roll milling of gun propellants”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

§ D. Kalyon, H. Tang, H. Gevgilili, C. Demir and J. Kowalczyk, “Squeeze flow rheometry of rheological characterization of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

§ S. Ozkan, D. Kalyon, J. Kowalczyk, H. Gevgilili, M. Mezger and C. Demir, “Processing of nanoenergetics with a fully-functional mini-twin screw extruder”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

§ D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy, “Adjustable gap rheometry for the rheological characterization of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

§ G. Mago, F.T. Fisher, and D.M. Kalyon, "Effect of shearing on the crystallization behavior of poly(butylene terephthalate) and PBT nanocomposites", Proceedings of ASME International Mechanical Engineering Conference and Exposition (IMECE), November 5-10, Chicago, IL (2006).

§ C. Feger, M. McGlashan-Powell, I. Nnebe and D. Kalyon, “Rheology and stability of highly filled thermal pastes”, IMAPS International conference on Device Packaging in conjunction with Global business Council Spring conference in Scottsdale, Arizona, March 21, 2006.

§ E. Demirkol and D. Kalyon, “Melt processing and rheological behavior of modified clay/polyolefin nanocomposites”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 1, 2005.

§ N. Degirmenbasi and D. Kalyon, “In-situ synthesis and processing of nano-hydroxyapetite in conjunction with poly(vinyl alcohol) and collagen based matrices and properties of the resulting biocomposites”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 2, 2005.

§ D. Kalyon, H. Tang and E. Birinci, “Development of extrudate distortions during the extrusion of energetic materials”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ H. Gevgilili and D. Kalyon, “Analysis of the fundamentals of the co-extrusion process for co-extrusion of fast/slow burn composite grains”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ C. Gonsalves, R. Muscato, S. Prickett, C. Cline, D. Kalyon, M. Malik, J. Kowalczyk, “Development of co-extrusion process for propellant manufacture”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ D. Kalyon, E. Birinci and D. Fair, “Rheological characterization of NC gels and development of processing simulants”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ S. Prickett, W. G. Thomas, C. Raddack, D. Kalyon, M. Malik, and J. Kowalczyk, “Twin screw extrusion processing of double base propellant”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ M. Malik, D. Kalyon and J. Kowalczyk, “Optimization of the selection of the extruder type, geometry and operating conditions for the processing of nano-energetic materials on the basis of FEM analysis”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

§ M. Malik and D. Kalyon, “Mathematical modeling of the co-rotating twin screw extrusion process and experimental studies”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 4, 2005.

§ (Key note address of Innovative Materials and Processes Session) D. Kalyon, “A novel process development platform for flexible manufacturing”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 17, 2005.

§ S. Ozkan and D. Kalyon “Twin screw extrusion processing of nanocomposites with hydrogel based binders”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 15, 2005.

§ D. Kalyon, H. Gevgilili and A. Mirza, “Co-extrusion of concentrated suspensions”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 17, 2005.

§ Kristin L. Jasinkiewicz, Timothy E. Dawag, Michael Fair, Roderick King, Dilhan Kalyon, Elvan Birinci and Halil Gevgilili, “Continuous Processing of Black Powder”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004.

§ Suzanne Prickett, William Newton, Stuart Richman, Wayne Thomas, Christopher Gonzalez, Dilhan M. Kalyon, Halil Gevgilili, Moinuddin Malik Tugrulbey Kiryaman and James E. Kowalczyk, "Twin screw extrusion processing of double base rocket propellant", 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004.

§ Dilhan M. Kalyon, "Rheological characterization platforms for the extrudability and safety analysis of energetic materials ", 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004.

§ H. S. Tang and D. M. Kalyon. “Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 8, 2004.

§ James E. Kowalczyk, James B. Graybill, Moinuddin Malik, Dilhan Kalyon, Halil Gevgilili, Mark Mezger and Brett Reddingius “Novel Extrusion Platforms for the Continuous Processing of Energetics”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004.

§ D. Kalyon, H. Gevgilili, E. Birinci, H. Tang, J. Kowalczyk and B. Karuv, “Novel rheological characterization platforms for the extrudability and safety analysis of energetic materials”, 13^th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

§ M. Malik, T. Kiryaman and D. Kalyon, “Mathematical modeling of the twin screw extrusion processing of energetic materials using tangential versus fully -intermeshing extruders”, 13^th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

§ D. Kalyon, D. Dalwadi, M. Erol, B. Greenberg and E. Birinci, “Rheological behavior of concentrated suspensions as affected by the degree of mixedness of their ingredients”, 13^th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

§ J. Kowalczyk, J. Graybill, B. Karuv, D. Kalyon, H. Gevgilili, M. Zghaibeh, S. Ozkan, M. Mezger and B. Reddingius, “Design and manufacture of the smallest twin screw extruder in the World for the processing of nanoparticles into nanoenergetics and nanocomposites”, 13^th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

§ D. Kalyon, H. Tang, E. Birinci and H. Gevgilili”, Predictions of the onset of the flow instabilities and gross surface irregularities of energetic grains during extrusion”, 13^th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

§ S .E. Prickett, C. Gonzalez and D. M. Kalyon, Twin Screw Extrusion Formulation Development and Rheological Characterization of Co-Layered Gun Propellant, JANNAF Interagency Propulsion Committee 32^nd Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center , Seattle Washington, July 29 (2004).

§ D. Kalyon, “Twin screw extrusion of solid rocket fuels and propellants”, 2003 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 20, 2003.

§ D. Kalyon, E. Birinci and H. Gevgilili, “Development of extrudate distortions as affected by wall slip behavior of polymers and filled polymers”, 2003 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 17, 2003.

§ H. Gocmez, B. Greenberg, R. Schefflan and D. Kalyon, “Development of Methodologies for the Control of the Polymorph and Morphology of Crystalline Energetics”, Second Advanced Energetics Technical Exchange, Aberdeen Proving Ground, MD, September 22, 2003.

§ G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, “Extrusion of BaSO4 filled medical-grade thermoplastic polyurethane”, Society of Plastics Engineers Annual Technical Conference, Knoxville, Tennessee, May 6 (2003).

§ G. Lu, D.M. Kalyon, I. Yilgor and E. Yilgor, "Coextrusion of TPU and BaSO4 filled Medical-Grade TPU”, Society of Plastics Engineers Annual Technical Conference, Knoxville, Tennessee, May 5 (2003).

§ B. Greenberg, D. Kalyon, M. Erol, M. Mezger, P. Redner, K. Lee and S. Lusk, “Structural analysis of slurry coated CL-20 (PAX 12 granules) using a novel grazing incidence x-ray diffraction method”, Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 25 (2003).

§ S. E. Prickett, C Murphy, W. Thomas and D. Kalyon, “Shear viscosity, extrudate swell and wall slip behavior of a double base propellant”, Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26 (2003).

§ D. M. Kalyon and H. Gevgilili, “The fundamentals of shear roll mill processing of gun propellants”, Joint Ordnance Commanders Group 12^th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 29, 2002.

§ H. Tang and D. M. Kalyon, “The solution of the inverse problem for the determination of the parameters of constitutive equations and wall slip for capillary and squeeze flows”, Joint Ordnance Commanders Group 12^th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 29, 2002.

§ H. Gevgilili and D. M. Kalyon, “The development of flow instabilities and gross surface irregularities with BAMO/AMMO and other filled systems”, Joint Ordnance Commanders Group 12^th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 31, 2002.

§ M. Malik and D. M. Kalyon, “The coupled 3-D simulation of flow and heat transfer in the extruder and the die”, Joint Ordnance Commanders Group 12^th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 31, 2002.

§ D. Kalyon, E. Birinci and H. Gevgilili, “Development of extrusion instabilities for filled polymers”, Society of Rheology 74^th Annual Meeting, Minneapolis, Minnesota, October 15, 2002.

§ Shah, H. Gevgilili and D. Kalyon, “Detachment of the polymer from the rolls in shear roll mill process”, Society of Rheology 74^th Annual Meeting, Minneapolis, Minnesota, October 16, 2002.

§ D. Kalyon and H. Gevgilili, “Strong Interactions at the wall to generate anomalous slip behavior during flows of complex fluids”, Society of Rheology 74^th Annual Meeting, Minneapolis, Minnesota, October 17, 2002.

§ E. Birinci, D. Kalyon, and C. Tsenoglu, “Effects of the specific energy input during mixing and the resulting degree of mixedness on the rheological behavior of concentrated suspensions”, Society of Rheology 74^th Annual Meeting, Minneapolis, Minnesota, October 17, 2002.

§ G. Lu and D. Kalyon, “ Rheology and structure evolution during flow of a medical-grad thermoplastic polyurethane”, Society of Rheology 74^th Annual Meeting, Minneapolis, Minnesota, October 16, 2002.

§ H. Gevgilili and D.M. Kalyon, "Catastrophic Failure of the No-slip Condition at the Wall during Torsional Flows and Development of Gross Surface Irregularities during Capillary flow of three Polymers", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002).

§ D.M. Kalyon and E. Birinci, "Electrical Conductivity of a Graphite based Composite as affected by the degree of mixedness of Graphite in the Elastomeric Matrix", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002).

§ D.M. Kalyon and H. Gevgilili, "Effect of Wall Slip of Polymer Melts on their Relaxation Modulus Behavior", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002).

§ Dilhan M. Kalyon, “Rheological Behavior of Concentrated Suspensions”, Keynote Lecture, Polymer Processing Society Regional Meeting, Antalya, Turkey, October 22, 2001.

§ Dilhan M. Kalyon, “Extrusion of Highly Filled Materials: Rheology, Structure Development, Mathematical Modeling and Experimental Studies, Polymer Processing Society Regional Meeting, Antalya, Turkey, October 22, 2001.

§ Dilhan M. Kalyon, “New Developments in Rheological Characterization of Energetic Materials”, 2001 Continuous Mixer and Extruder users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001.

§ Dilhan M. Kalyon, “Continuous Processing of Energetic Materials”, 2001 Continuous Mixer and Extruder users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001.

§ R. Schefflan, S. Kovenklioglu and D. Kalyon, “Modeling of Aluminum Nanoparticle Formation”, 199^th Meeting of the Electrochemical Society on March 27, 2001 in the Fundamental Gas-Phase and Surface Chemistry of Vapor Deposition II and Process Control, Diagnostics and Modeling Symposium”, Washington, DC.

§ M. Gallant, W. Newton, S. Johnson, S. Prickett, D. M. Kalyon, A. Lawal and S. Railkar, “Twin Screw Processing of GEM Gun Propellant”, Joint Ordnance Commander’s Group 10th Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Ogden, Utah, May 10, 1999.

§ D. M. Kalyon, S Railkar and A. Lawal, “New Techniques for the Simulation of Die and Twin Screw Extrusion Processing of Energetic Materials”, Joint Ordnance Commanders Group 10^th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999.

§ J. Kowalczyk and D. Kalyon, “Simulation Based Design and Manufacture of Screws and Dies for the Energetics Industry”, Joint Ordnance Commanders Group 10^th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999.

§ R. Yazici and D. M. Kalyon, “On-Line and Off-line Analysis of the Extruded and Cast Energetic Materials for Microstructural Distributions”, Joint Ordnance Commanders Group 10^th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999.

§ D. M. Kalyon, B. Karuv and J. Garrow, “A New Squeeze Flow Rheometer for the Rheological Characterization of Energetic Materials”, Joint Ordnance Commanders Group 10^th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999.

§ E. Birinci, R. Yazici, and D. M. Kalyon, “Statistics of Mixing Distributions in Filled Elastomers Processed by Twin Screw Extrusion”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ R. Yazici, B. Karuv, E. Birinci, J. Garrow, and S. Walsh and D. M. Kalyon, “Particulate based Conductive Composites Exploiting Percolation-Range Microstructure”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ M. Rege, S. Kovenklioglu, R. Yazici, D. M. Kalyon, and E. Birinci, “Elastomeric Coating of Filler Powders by Slurry Precipitation”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ M. Allende and D. Kalyon, “Assessment of Particle Migration Effects in Capillary Rheometry of Filled Polymers”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City, May 3-7, (1999).

§ Lawal and D. Kalyon, “Squeeze Flow Rheometer”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ E. Kucukpinar, D. Kalyon and P. Tong, “Viscoelasticity of Polyethylenes Produced with Single Site Metallocene Catalysis”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ Lawal, S. Railkar and D. Kalyon, “3-D Analysis of Fully Flighted Screws of Co-Rotating Twin Screw Extruders”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ Lawal, S. Railkar and D. Kalyon, “Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip”, Society of Plastics Engineers 57^th Annual Technical Conference, New York City , May 3-7, (1999).

§ Kalyon, “Rheology and Extrusion of Highly Filled Pastes and Suspensions”, Symposium of Particle Technology, Newark, New Jersey, March 25, 1999.

§ M. Kalyon, “Twin Screw Extrusion of Suspensions with High Degree of Solid Fill”, CAE in Polymer Processing Gordon Research Conference”, Ventura, California, March 16, 1999.

§ Kalyon and A. Lawal, “Viscous Heating in Non-Isothermal die Flows of Viscoplastic Fluids with Wall Slip”, Polymer Processing Society, North American Meeting, Toronto, Canada, August 18, 1998.

§ M. Allende and D. M. Kalyon, “ Migration of Particles in Pressure Driven Flows”, 70^th Annual Meeting of Society of Rheology, Monterrey, California, October 8, 1998.

§ R. Yazici and D. M. Kalyon, “Measurement of Processing Effects on Crystal Defects”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998)

§ R. Yazici and D. M. Kalyon, “Quantitative Measurement of Mixing Quality”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998).

§ S. Kovenklioglu, R. Yazici and D. M. Kalyon, “Environmentally Acceptable Alternative Solvent Systems for CL-20 Processing”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998).

§ Lawal and D. Kalyon, "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip", Polymer Processing Society North American Meeting, Toronto, Ontario, Canada, August 18 (1998).

§ M. Kalyon, “Extrusion of Highly Filled Suspensions”, Plenary Talk in Recent Advances in Powder Technology Particle Technology Forum, 1997 Annual Meeting of American Society of Chemical Engineers, Los Angeles, California, November 17, 1997.

§ Aral and D. M. Kalyon, "Viscoelasticity of Concentrated Suspensions with Non-Colloidal Spherical Particles" 68th Annual Meeting of Society of Rheology Galveston, Texas, February (1997)

§ M. Kalyon, A. Lawal, S. Railkar, "Numerical Simulation of Coupled Extrusion and Die Flows" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February, (1997)

§ Wagner, T. J. Fiske and D. M. Kalyon, "Uniaxial Extensional Flow of Polyamide/glass Fiber Suspensions" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February (1997)

§ M. Kalyon, H. Gokturk and I. Boz, "Continuously Adjustable-Gap In-Line Rheometer" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February, (1997)

§ M. Kalyon (invited talk) “Mathematical Modeling and Experimental Studies of Twin Screw Extrusion Processing of Filled Polymers”, International Symposium on Polymer Blends, Alloys and Filled Systems”, Montreal, Canada, October 9, (1997).

§ T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles", SPE Annual Technical Conference, Toronto, Canada, May (1997)

§ Kucukpinar and D. M. Kalyon, "Viscoelasticity and Processability of a BAMO/AMMO Thermoplastic Elastomer" Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

§ R. Yazici and D. M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-angle x-ray Diffraction" Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

§ Wagner, D Kalyon, R. Yazici, and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

§ D. M. Kalyon, H. Gokturk and I. Boz, "An Adjustable Gap In-Line Rheometer", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

§ Z. Cao, S. Kovenklioglu, R. Yazici and D. M. Kalyon, "Dissolution Rates of Oxetane Thermoplastic Elastomer for Dissolution based Recycling of Elastomeric Formulations", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

§ S. E. Prickett, D. M. Kalyon and S. Railkar, " Temperature Dependent Shear Viscosity Material Function of AA-6 Propellant" JANNAF Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center , Sunnyvale, California, April (1997)

§ D. M. Kalyon, S. Railkar, M. Michienzi and C. M. Murphy "Die Design for Twin Screw Extruded Composite Propellant Grain" JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center, Sunnyvale, California, April (1997)

§ Michienzi, C. M. Murphy, D. M. Kalyon and S. Railkar, "Wall Slip and Capillary Flow Behavior of Extrudable Composite Propellant", "JANNAF Conference Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997)

§ D. M. Kalyon, S. Railkar, S.E. Prickett, M. A. Michienzi, C. M. Murphy and F. M. Gallant, "Capillary and On-Line Slit Rheometry of an HE LOVA Gun Propellant Formulation," "JANNAF Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997)

§ D. M. Kalyon, S. Railkar, H. Gokturk, l. Boz and R. Guy, "Twin Screw Extrusion Processing of Extrudable Composite Propellant Simulant", "JANNAF Conference Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997)

§ S. Railkar, A. Lawal and D. M. Kalyon, " 3-D FEM Analysis of Regular Flighted Single and Twin Screw Extruder Screw Elements", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June (1997)

§ Kucukpinar and D. M. Kalyon "Viscoelastic Material Function and Extrudability of BAMO/AMMO TPE", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997)

§ S, Kovenklioglu, Z. Cao, R. Yazici, S. Railkar, E. Kucukpinar and D. M. Kalyon, "Twin Screw Extrusion Based Recovery, Recycle and Reuse of Grains with Energetic TPE Binder," 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997)

§ R. Yazici, E. Birinci, D. Fair, W. Ansley and D. M. Kalyon, "X-ray Based Degree of Mixing Analysis of Extruded Grains: Ramifications for On-Line Control of Continuous Processing", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997)

§ Aral and D. M. Kalyon, " Viscoelastic Behavior of Filled Polymers", 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ M. Allende and D.M. Kalyon, "Shear-induced Particle Migration in Concentrated Suspensions of non-colloidal Particles," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ Wagner, D. M. Kalyon, R Yazici and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ Lawal, S. Railkar and D. M. Kalyon, "3-D Analysis of Fully Flighted Screws of Co-Rotating Twin Screw Extruder," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ Kucukpinar and D. M. Kalyon "Viscoelasticity and Processability of a Thermoplastic Elastomer," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ D. M. Kalyon and H. Gokturk, "An Adjustable Gap In-Line Rheometer" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ S. Railkar, A Lawal and D. M. Kalyon, "Twin Screw Extrusion and Die Flow of Filled Elastomer" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ R. Yazici and D. M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-Angle X-Ray Diffraction" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997)

§ Wagner and D. M. Kalyon, "Parison Formation and Inflation of Polyamides in Blow Molding", Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ T. Fiske, H. Gokturk and D. M. Kalyon, "Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ T. Fiske, A. Wagner, R. Yazici and D. M. Kalyon, "Uniaxial Extensional Flow Behavior of Fiber Filled Suspensions as Affected by Fiber Aspect Ratio and Concentration," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Twin Screw Extrusion Processing of Filled Polymers," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ Lawal, S. Railkar and D. M. Kalyon, "Coupled Simulation of Die and Extrusion Flows Using Three-Dimensional Finite Element Method," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ Wagner, D. M. Kalyon and V. Tan, "Microstructural Distributions in Extrusion Blow Molded Semicrystalline Resins," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

§ Michienzi, C. Murphy and D. M. Kalyon, "Using Instrumented Capillary Dies to Characterize the Rheology of Extruded Composite Propellant," Proceedings of JANNAF Conference, April 1996.

§ R. Yazici and D. M .Kalyon, "Novel X-ray-based Crystalline Defect Analysis Technique," Energetic Materials Workshop, Annapolis, MD Dec. 3-6, 1996.

§ D. M. Kalyon, "Twin Screw Extrusion Processing of Highly Filled Materials: Experiments vs. Theory," Proceedings of 8th Annual Continuous Mixer and Extruder Users' Group Meeting, hosted by Indian Head Division of Naval Surface Warfare Center and Navy Energetics Manufacturing Technology Center of Excellence, September 20-22, 1995.

§ D. M. Kalyon, "Rheological Behavior and Continuous Processing of Propellants," BMDO/IST Workshop, Chestertown, MD, Oct. 12, 1995.

§ D. M. Kalyon (joint paper with S. Kovenklioglu, R. Yazici and Z. Cao), "Introduction of Recycling Technologies to Production of Propellant, Explosives and Pyrotechnics," SERDP Workshop and Progress Review Meeting, Arlington, VA, Nov. 15, 1995.

§ Yazici and D. M. Kalyon, "Degree of Mixing Analysis of Propellants by a Novel Wide-Angle X-ray Diffraction Method," Joint Ordnance Commanders Explosives and Propellants Subgroup, Picatinny Arsenal Army Base, NJ, Nov.7, 1995.

§ D. M. Kalyon, "Simulation of Continuous Processing of Propellants and Explosives," Joint Ordnance Commanders Explosives and Propellants Subgroup, Picatinny Arsenal Army Base, NJ, Nov. 7, 1995.

§ D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Motion Analysis of Development of Wall Slip During Die Flow of Concentrated Suspensions," SPE ANTEC Conference, Boston, MA, May 7-11, 1995.

§ P. Yaras, A. Lawal and D. M. Kalyon, "Twin Screw Extrusion of Concentrated Suspensions," Society of Rheology, 67th Annual Meeting, Sacramento, CA, Oct. 8-12, 1995.

§ D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Development of Wall Slip During Die Flow of Concentrated Suspensions as Revealed by High Speed Cinematography," Society of Rheology, 67th Annual Meeting, Sacramento, CA, Oct. 8-12, 1995.

§ D. M. Kalyon, "Rheology of Highly Filled Materials," Eighth Annual Meeting of Continuous Mixer and Extruder Users' Group Meeting, Alexandria, VA, Sep. 20, 1995.

§ D. M. Kalyon, "Twin Screw Extrusion of Highly Filled Materials," Eighth Annual Meeting of Continuous Mixer and Extruder Users' Group Meeting, Alexandria, VA, Sep.20, 1995.

§ D. M. Kalyon and S. Kovenklioglu, "Concomitant Neutralization, Gelation and Encapsulation of Chemical Munitions," Symposium on Alternatives to Incineration for Disposal of Chemical Munitions and Energetics, Stevens Institute of Technology, Hoboken, NJ, June 5-6, 1995.

§ D. M. Kalyon, "Rheological Behavior of Highly Filled Materials," Proceedings of 8th Annual Continuous Mixer and Extruder Users' Group Meeting, hosted by Indian Head Division of Naval Surface Warfare Center and Navy Energetics Manufacturing Technology Center of Excellence, September 20-22, 1995 September 20-22, 1995.

§ D. M. Kalyon, "Mathematical Modeling of Extrusion Flows of Concentrated Suspensions," Seminar at Pure and Applied Mathematics Department, Stevens Institute of Technology, Hoboken, NJ, Nov. 16, 1994.

§ R. Yazici, A. Wagner, D. M. Kalyon and S.B. Han, "Extrudate Swell Behavior of Engineering Plastics Reinforced with Glass Fibers," Society of Plastics Engineers ANTEC Technical Conference, San Francisco, CA, May, 1994.

§ D. M. Kalyon, "Rheological Behavior of Highly Filled Suspensions," 7th Annual Meeting of Mixer and Extruder Users Group, Phoenix, AZ, March 16, 1994.

§ D. M. Kalyon, "Simulation of Continuous Processing of Highly Filled Suspensions," 7th Annual Meeting of Mixer and Extruder Users Group, Phoenix, AZ, March 16, 1994.

§ D. M. Kalyon, "Rheological Behavior of Solid Rocket Fuel Simulants," ADPA International Meeting, Orlando, FL, March 21-25, 1994.

§ S. Gokturk, P. Yaras and D. M. Kalyon, "Monitoring of the Slit Flow of a Highly Filled Suspension by Laser Video Microscopy," Optical Society of America Annual Meeting, Toronto, Canada, Oct. 6, 1993.

§ D. M. Kalyon, "Techniques to Analyze Goodness of Mixing of Concentrated Suspensions and Simulation of Mixing in Extrusion Flows," 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Lawrence Livermore National Laboratory, Livermore, CA, April 28, 1993.

§ D. M. Kalyon, "Rheological Behavior of Solid Rocket Fuel Simulants," 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Lawrence Livermore National Laboratory, Livermore, CA, April 29, 1993.

§ Lawal and D. M. Kalyon, "Three Dimensional Analysis of Co-rotating Twin Screw Extrusion Using Tools of Dynamics," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ Lawal and D. M. Kalyon, "Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ R. Yazici and D. M. Kalyon, "Characterization of Degree of Mixing of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ Aral and D. M. Kalyon, "Time-Dependent Development of Wall Slip in Shear Flows of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ Gokturk, T. Fiske and D. M. Kalyon, "Dielectric Properties of Polyethylene-Stainless Steel Fiber Composites," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ P. Yaras, U. Yilmazer and D. M. Kalyon, "Unstable Flow of Concentrated Suspensions in Tube Flow," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ Wagner and D. M. Kalyon, "Extrudate Swell, Rheological Behavior and Parison Formation of Blow Molding Grade Engineering Resins," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ T. Fiske, H. Gokturk and D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Ferromagnetic Powders," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993.

§ S. Gokturk, T. Fiske and D. M. Kalyon, "Granular Magnetic Composites Employing Cobalt Based Amorphous Alloys in a Polymeric Host," 37th Annual Conference on Magnetism and Magnetic Materials, Houston, TX, Dec. 1-4, 1992.

§ M. Kalyon, "Simulation of Continuous Processing of Highly Filled Suspensions," Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, Nov. 17, 1992.

§ M. Kalyon, "Rheological Behavior of Highly Filled Suspensions," Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, Nov. 17, 1992.

§ Lawal and D. M. Kalyon, "Processing of Viscoplastic Fluids in Single Screw Pumps Subject to Wall Slip: An Analytical Model," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992.

§ Lawal and D. M. Kalyon, "Non-Isothermal Modeling of Single Screw Extrusion Processing of Concentrated Suspensions with Wall Slip," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992.

§ Wagner and D. M. Kalyon, "Parison Formation Behavior of Blow Molding Grade Semi-Crystalline Resins," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992.

§ Y. Chen, D. M. Kalyon and E. Bayramli, "Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow: Effects of Materials of Construction and Surface Roughness," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ Aral, D. M. Kalyon and H. Gokturk, "The Effects of Air Incorporation in Concentrated Suspension Rheology," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ Gokturk, T. Fiske, D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Nickel Powders, Fibers, and Flakes," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ S. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ Z. Ji and D. M. Kalyon, "Two Dimensional Computational Study of Chaotic Mixing in Two-tipped Kneading Paddles of Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ Lawal and D. M. Kalyon, "A Non-isothermal Model of Single Screw Extrusion Processing of Viscoplastic Materials Subject to Wall Slip," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992.

§ Kalyon, "Simulation and Experimental Studies of Continuous Processing of Concentrated Suspensions in Twin Screw Extruders," Joint Ordnance Commanders Group 5th Annual Meeting of the Continuous Mixer and Extruder Users Group, sponsored by US Army and Navy, Williamsburg, VA, Dec. 2, 1991.

§ Kalyon, B. Aral and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ W. Sinton, J. C. Crowley, G. A. Lo, D. M. Kalyon and C. Jacob, "Nuclear Magnetic Resonance Imaging Studies of Mixing in Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ Yao, H. Suwardie, D. M. Kalyon and S. Kovenklioglu, "Conversion of Polymeric Precursors into Ceramics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ S. Yu, M. Lim and D. M. Kalyon, "Characterization and Simulation of Density Distributions in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ Wagner and D. M. Kalyon, "Formation of Cracks in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ Gotsis, A. Ji and D. M. Kalyon, "3-D Analysis of the Flow in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ Z. Ji, A. Gotsis and D. M. Kalyon, "Single Screw Extrusion Processing of Highly Filled Suspensions Including Wall Slip," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ M. Kalyon and J. Yu, "Microstructure Development in Blow Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

§ M. Kalyon, A. Gotsis, U. Yilmazer and Z. Ji, "Simulation and Experimental Studies of Mixing in Co-rotating Twin Screw Extruders," PPS Meeting, August 17, 1989.

§ M. Kalyon and H. N. Sangani, "Characterization of Distributive Mixing in Fully-Intermeshing, Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ Gotsis and D. M. Kalyon, "Simulation of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ U. Yilmazer, C. G. Gogos and D. M. Kalyon, "Unstable Flows During Compounding of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ Yu, D. M. Kalyon and A. H. Wagner, "Simulation of Microstructure Development in Injection Molding of Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ Wagner, J. S. Yu and D. M. Kalyon, "Orientation and Residual Stress Distributions in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ U. Yilmazer and D. M. Kalyon, "Slip Effects in Viscometric Flows of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989.

§ M. Kalyon, U. Yilmazer and B. Aral, "Rheological Behavior of Highly Filled Suspensions," Society of Rheology Meeting, Montreal, Canada, November, 1989.

§ S. W. Sinton, J. C. Crowley, R. Van de Griend, D. T. Wadiak, B. H. Suits and D. M. Kalyon, "NMR Imaging of Particle/Polymer Suspensions," Pacific Coast Conference on Spectroscopy and Chemistry, San Francisco, CA, 1988.

§ M. Kalyon, "Dynamics of the Blow Molding Process and Properties of Blow Molded Articles," Polymer Processing Society, Fourth Annual International Meeting, Orlando, FL, May 8-11, 1988.

§ M. Kalyon and A. Gotsis, "Simulation of TSE: Source Code Development on a Supercomputer," Poster Presentation at Newark Remote Access Center of JVNC, Mini-symposium, Newark, NJ, April 25, 1988.

§ M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Towards a Better Understanding of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Atlanta, GA, April 17-21, 1988.

§ D. M. Kalyon, A. Wagner and S. Dey, "Microstructure Development in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Atlanta, GA, April 17-21, 1988.

§ D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in the Co-rotating Twin Screw Extrusion Process," Symposium on Innovative Science and Technology, Los Angeles, CA, Jan 10-15, 1988.

§ D. M. Kalyon and S. Dey, "Rheology and Injection Molding of Engineering Plastics: Poly(ether imide) and Poly(phenylene oxide) Resins," 37th Canadian Chemical Engineering Conference, in conjunction with Canadian Eng. Centennial Convention, Montreal, Canada, May 18-22, 1987.

§ D. M. Kalyon and S. Kovenklioglu, "Processability of Polymeric Precursors for Non-Oxide Ceramic Applications," AIChE Conference on Emerging Technologies in Materials, Minneapolis, Minn., August 18, 1987.

§ Tsenoglou, D. M. Kalyon and C. Gogos, "A Constitutive Equation for Flowing Polymer Suspensions," AIChE Conference on Emerging Technologies in Materials, Minneapolis, Minn., August 18, 1987.

§ Gotsis, D. M. Kalyon, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in Co-rotating Twin Screw Extrusion Process," Polymer Processing Society, North American Meeting, Sep 29, 1987.

§ D. M. Kalyon, S. Dey and A. Wagner, "Injection Molding of Two Engineering Plastics: Poly(ether imide) and Poly(phenylene ether)," Polymer Processing Society, North American Meeting, Sep 29, 1987.

§ D. M. Kalyon, F. Moy, V. Tan and S. Bhakhuni, "Microstructure Development in the Blown Film Extrusion of Linear Low Density Polyethylenes as Affected by Alpha Olefin Comonomers," Society of Plastics Engineers, 44th Annual Technical Conference, Boston, MA, May 1-4, 1986.

§ Tsenoglou, D. M. Kalyon and C. Gogos, "A Viscoelastic Constitutive Relationship for Flowing Polymeric Suspensions and Composites," Symposium of Engineering Applications of New Composites at the University of Patras, Patras, Greece, August 27, 1986.

§ M. Kalyon and M. Hallouch, "Processability of Thermosets as Affected by Compounding Conditions in Continuous Kneaders," Society of Plastics Engineers, 43rd Annual Technical Conference, Washington, DC, May 2-5, 1985.

§ M. Kalyon and F. Moy, "Blown Film Extrusion of Linear Low Density Polyethylenes: Effects of Alpha-Olefin Comonomers," Society of Plastics Engineers, 43rd Annual Technical Conference, Washington, DC, May 2-5, 1985.

§ M. Kalyon, M. Hallouch and N. Fares, "Recycling of Thermosets as Fillers," Society of Plastics Engineers, 42nd Annual Technical Conference, New Orleans, LA, May 2-5, 1984.

§ D. M. Kalyon and M. Khemis, "Effects of Slip Additives on the Rheology of LDPE Resins and Ultimate Properties of Blown Films," Society of Plastics Engineers, 42nd Annual Technical Conference, New Orleans, LA, May 1-4, 1984.

§ D. M. Kalyon and M. Bouazza, "Processing Thermosetting Powders in Continuous Kneaders," Society of Plastics Engineers, 41st Annual Technical Conference, Chicago, IL, May 2-5, 1983.

§ M. Kamal and D. M. Kalyon, "Microstructure and Ultimate Properties of Extrusion Blow Molded Polyethylene Bottles," International Symposium of International Union of Pure and Applied Chemistry, Athens, Greece, Aug 29-Sep 2, 1982.

§ M. Kamal, D. M. Kalyon and V. Tan, "Distribution of Thickness and Properties in Blow Molded Polyethylene Bottles," Society of Plastics Engineers, 39th Annual Technical Conference, Boston, MA, May 4-7, 1981.

§ M. Kamal, D. M. Kalyon and V. Tan, "Melt Deformation during Parison Formation and Inflation in Extrusion Blow Molding," 8th International Congress on Rheology, Naples, Italy, Sep 1-5, 1980.

§ D. M. Kalyon, M. Kamal and V. Tan, "Experimental Study of the Blow Molding Process," 29th Canadian Chemical Engineering Conference, Sarnia, Canada, Sep 30-Oct 3, 1979.

§ M. Kamal, D. M. Kalyon and V. Tan, "An Experimental Study of Parison Formation and Inflation in Extrusion Blow Molding," Golden Jubilee Meeting of the Society of Rheology, Boston, MA, Oct 29-Nov 2, 1979.

§ D. M. Kalyon, V. Tan and M. Kamal, "Dynamics of Parison Development in Blow Molding," Society of Plastics Engineers, 37th Annual Technical Conference, New Orleans, LA, May 7-10, 1979.

§ M. Kamal, D. M. Kalyon and V. Tan, "An Integrated Approach to Injection Molding Analysis," 47th Annual Meeting of the Society of Rheology, New York, NY, Feb 27-Mar 2, 1977.