Muhammad R. HajjGeorge Meade Bond Professor and Department Chair Civil, Environmental and Ocean Engineering Director, Davidson Laboratory Stevens Institute of Technology Email: mhajj@stevens.edu, Phone: 201/216-3556 Physical address: 200 Davidson, 711 Hudson St, Hoboken, NJ 07030 Mailing address: 1 Castle Point Terrace, Hoboken, NJ 07030 Hoboken, NJ 07030
|
Mahmoud Ayyad
Alaa Abdullah
Saeed Alnuaimi
Hesham Shehata
Eric Hammack
Ahmed Hussein, Engineering Mechanics, 2018
Dissertation Title: Dynamical System Representation and Analysis of Unsteady Flow and Fluid-Structure Interactions.
Jamal Alrowaijeh, Engineering Mechanics, 2018
Dissertation Title: Fluidic Energy Harvesting and Sensing Systems.
Abdelmohsen Al-Othman, Engineering Mechanics, 2016
Dissertation Title: Modeling and Applications of Thermoelectric Generators.
Mohamed Al-Haik, Engineering Mechanics, 2016
Dissertation Title: Nanoparticle-based Organic Energy Storage with Harvesting Systems.
Mohamed Zakaria, Engineering Mechanics, 2016
Dissertation Title: Unsteady Nonlinear Aerodynamic Modeling and Applications.
Zhimiao Yan, Engineering Mechanics, 2014
Dissertation Title: Modeling of Nonlinear Unsteady Aerodynamics, Dynamics and Fluid Structure Interactions.
Youssef Bichiou, Engineering Mechanics, 2014
Dissertation Title: Modeling Analysis and Control of Nonlinear Aeroelastic Systems.
Haithem Taha, Engineering Mechanics, 2013
Dissertation Title: Mechanics of Flapping Flight: Analytical Formulations of Unsteady Aerodynamics, Kinematic Optimization, Flight Dynamics and Control.
Arshad Mehmood, Engineering Mechanics, 2013
Dissertation Title: Active/Passive Controls and Energy Harvesting from Vortex-Induced Vibrations.
Samah Ben Ayed, Engineering Mechanics, 2013
Dissertation Title: Analysis, Simulation and Control of Peak Pressure Loads on Low-Rise Structures.
Abdessattar Abdelkefi, Engineering Mechanics, 2012
Dissertation Title: Global Nonlinear Analysis of Piezoelectric Energy Harvesting from Ambient and Aeroelastic Vibrations.
Mehdi Ghommem, Engineering Mechanics, 2011
Dissertation Title: Modeling and Analysis of Unsteady Aeroelastic Systems.
Giovanni Sansavini, Engineering Mechanics, 2010
Dissertation Title: Network Modeling: Stochastic and Deterministic Approaches.
Andrea Mola, Engineering Mechanics, 2010
Dissertation Title: Multi-physics and Multilevel Fidelity Modeling and Analysis of Olympic Rowing Boat Dynamics.
Giancarlo Bordonaro, Engineering Mechanics, 2009
Dissertation Title: Damage Detection in Structures through Nonlinear Excitation and System Identification.
Christopher Chabalko, Engineering Mechanics, 2007
Dissertation Title: Identification of Transient Nonlinear Aeroelastic Phenomena.
Mohamed A. K. El-Sayed, Engineering Mechanics, 2005
Dissertation Title: Large Eddy Simulation and Wavelet Analysis of the Flow Field around a Surface-Mounted Prism.
Yasser M. El-Okda, Engineering Mechanics, 2005
Dissertation Title: Experimental and Numerical Investigations of the
Effects of Incident Turbulence on the Flow over a Surface-Mounted Prism.
Zhongfu Ge, Engineering Mechanics, 2004
Dissertation Title: Analysis of Surface Pressure and Velocity Fluctuations in the Flow over Surface-Mounted Prisms.
Lihai Qin, Engineering Mechanics, 2004
Dissertation Title: Development of Reduced-Order Models for the Lift
and Drag Coefficients on an Oscillating Circular Cylinder with
Higher-Order Spectral Moments.
Baha M. Suleiman, Engineering Mechanics, 2000
Dissertation Title: Identification of Finite-Degree-of-Freedom Models for Ship Motions.
Dimitrios G. Stamos, Engineering Mechanics, 2000
Dissertation Title: Experimental Analysis of the Interaction of Water Waves with Flexible Structures.
Isam M. Janajreh, Engineering Mechanics, 1998
Dissertation Title: Wavelet Analysis of Extreme Wind Loads on Low-rise Structures.
Vamsi Chandra Meesala, Engineering Mechanics, 2018
Thesis Title: Nonlinear Dynamics and Applications of a Cantilever Beam Mass System.
Nilma Barsallo Pacheco, Engineering Mechanics, 2014
Thesis Title: Material and Damping Characterization of
Discretized Adhesive Tapes in Cantilever Beans undergoing Free and
Forced Vibrations.
Nathan L. Maines, Engineering Mechanics, 2005
Thesis Title: Modeling Wind Loads on Structures with the Discrete Vortex Method.
Chris Chabalko, Engineering Mechanics, 2001
Thesis Title: Comparison of Paul and Morlet Wavelets for
Measuring the Characteristic Scale of Peak Pressure Events on Low-Rise
Structures.
Lihai Qin, Engineering Mechanics, 2001
Thesis Title: Vorticity Modeling for the Flow over Surface-Mounted Prisms.
Lin Tian, Engineering Mechanics, 1999
Thesis Title: Analysis of Time-varying Characteristics of Simulated Turbulence in Wind Tunnels.
Craig Lusk, Engineering Mechanics, 1999
Thesis Title: Wavelet Analysis and its Application to Modulation Characterization.
Jimmy Fung, Engineering Mechanics, 1998
Thesis Title: Parameter Identification of Nonlinear Systems Using Perturbation Methods and Higher-order Statistics.
Isam Janajreh, Engineering Mechanics, 1994
Thesis Title: Quantification of Linear and Nonlinear Energy Transfer Processes in a Plane Wake.
Rui M. G. Vasconcellos - Laboratory of Aeroelasticity, University of Sao Paulo, Sao Carlos, Brazil, 2010-2011
Xiaojuan Song- Beijing Institute of Technology, China, 2012-2013
Daniel de Almeida Pereira - Laboratory of Aeroelasticity, University of Sao Paulo, Sao Carlos, Brazil, 2014
Carlos Renan dos Santos- Laboratory of Aeroelasticity, University of Sao Paulo, Sao Carlos, Brazil, 2015-2016